Carbon fiber and fabric product :  All types of carbon fiber; conductive, activated carbon fabric, high strength , high modulus

PC defoamer, PC 1244, PC 1344, PC 1644, PC1844
Highly effective defoamer for non aqueous organic system, used widely by MNC in their lubricants formulation for clearing the test, ASTM 892 sequence I ~IV.

MCS 352B is a viscous assembly lubricant for components and equipment designed to use Skydrol aviation hydraulic fluids. Approved by airframe manufacturers, MCS 352B lubricates seals during assembly, preventing them from being damaged. It introduces no foreign material into the hydraulic system because it contains no silicone oils, nor any petroleum based products.

MCS 2361 is not used in aviation, but is an industrial phosphate ester fluid. It is used in fire department rescue equipment, where fire resistance is an essential attribute.

MCS 293 is use as gas and liquid phase lubricant for gas engines on certain aircraft
MCS 2408 is a component used in the formulation of dielectric heat transfer fluids for aircraft and spacecraft heat dissipation.
It is also used in other applications such as an additive for greases and lubricants to provide seal swell

Polyphenyl Ether, OS 124, OS 138 restore damaged connection, prevents fretting corrosion, protect connectors for life. Most failures are due to poor contacts. In order for electronic equipment not to fail, especially, at higher service temperature, this is the product one should consider.

Santotrac  Traction lubricant and fluid becomes glassy solid under pressure and reverts to liquid in its absence, resulting in superb transfer of power in metal to metal traction drive system.
The pseudo solid film that comes between the metal contact results in the following advanrages: less or no wear in metals; lower noise level; reduced metal fatigue; superb power transfer.

Santovac 5 has exceptionally low volatility and is thermally stable, non-halogenated water white fluids. They exhibit extraordinary resistance to degradation from heat, oxygen, radiation and chemical attack. These lubricants are designed for applications where extremely high temperatures and adverse environments are expected. They consist of 100% pure polyphenyl ethers and are compatible with most metals and elastomers commonly used in high vacuum pumps, satelite and Boeing 757 fuel filter and packings

Skydrol LD4; Skydrol 500B4  are approved by all airframe manufacturers specifying phosphate ester hydraulic fluids, including the following material specifications:

SkyKleen is a new generation aviation solvent that combines excellent cleaning performance with environmentally friendly characteristics. Inherently biodegradable, Non-halogenated, Non-ozone depleting, Minimizes VOC emissions Non-Hazardous waste per RCRA

Skylubricant 600 is an extreme high temperature turbine/jet engine lubricant. The performance of jet engine / turbine lubricant in terms of cleanliness, seal compatibility and thermo-oxidative stability is dependent upon the complex mixtures of base material and additives.